3 Pack White 2" Uniseal Pipe-to-Tank Seal Fitting Grommet for RV Water Tanks - Heavy Duty Rubber Bulkhead Connector for Plumbing, Marine & Concession Applications

Read and follow all installation instructions prior to installing this item. Instructions 1. Be sure to have recommended hole saw for selected fitting - check chart before cutting. 2. Using hole saw, cut hole in wall and ensure that the hole is cut clean. Irregular holes could cause poor seating and possible leaks. File or sand the edges so there are no rough or sharp edges and be sure to remove any remaining debris. 3. Insert the Uniseal with the wide surface facing out. 4. Make certain the pipe to be inserted is cut clean and square, file or sand the edges so there are no rough or sharp edges to cut the Uniseal surface. 5. Use liquid soap or Teflon lube on the pipe to be inserted. Insert the pipe into the Uniseal as far as needed to clear the inside of the seal by about 2". **DO NOT use silicone based lubricants as they will not evaproate and may unseat** 6. Be sure to clean tank thoroughly prior to using removing any debris and lubricant residue.

3 PACK | Uniseal Water Tank. Pipe-to-tank-Seal FittingGrommet

COLOR White

SIZE 2"

HOLE SAW NEEDED 3"

Read and follow all installation instructions.